|
Product Details:
|
| Product Name: | Manual Roll Pipe Groover Pipe Grooving Tool | Scope Of Application: | 3/4-8 |
|---|---|---|---|
| Material: | SCH40 Steel Pipe | Working Range: | φ27mm- φ 219mm |
| Max Processing Wall Thickness: | 7mm | Packing Size: | 25 * 15 * 25cm |
| G.W/N.W.: | 23/21 KGS | Package: | 1POLY Case/set |
| Origin: | China | Usage: | Can Be Mounted On RIDGID300 Power Unit |
| High Light: | Fire Protection Pipe Groover,Manual Roller Pipe Groover,Joining Pipe Grooving Tool |
||
A manual pipe grooving tool, also known as a pipe groover or pipe grooving machine, is a hand-operated tool used to create grooves or notches in pipes. These grooves are typically made for joining pipes together using mechanical couplings or fittings. Manual pipe grooving tools are commonly used in plumbing, fire protection, and HVAC (heating, ventilation, and air conditioning) systems.
Technical Parameters
Machining size: 3/4”-8” (27-219mm) SCH40 steel pipe
Pipe wall thickness: Max 7mm
G.W.: 23kgs
Packing size: 25 x 15x 25 cm
Remark: Can be mounted on RIDGID300 power unit
Learning of pipe grooving machine
Here's a general overview of how a manual pipe grooving tool works:
1. Select the appropriate tool: Choose a manual pipe grooving tool that is compatible with the pipe material, size, and groove specifications you require. Different tools are designed for specific pipe materials such as steel, copper, or plastic.
2. Pipe preparation: Prepare the pipe by cutting it to the desired length and removing any burrs or debris from the ends using a pipe cutter or deburring tool.
3. Mount the pipe: Securely mount the pipe in a vise or pipe-holding device to keep it stable during the grooving process. Ensure that the pipe is aligned properly and firmly clamped.
4. Adjust the tool: Set the tool according to the groove specifications required for your specific application. This may involve adjusting the groove depth, width, and location on the pipe.
5. Position the tool: Position the manual pipe grooving tool at the desired location on the pipe. The tool typically consists of a cutting wheel or blade that is designed to create the groove.
6. Operate the tool: Apply consistent pressure and rotate the tool around the pipe circumference. The cutting wheel or blade will gradually remove material from the pipe, forming the groove as you rotate the tool.
7. Inspect the groove: Periodically inspect the groove to ensure that it meets the required specifications and standards. Check for proper depth, width, and smoothness of the groove.
8. Repeat as needed: If multiple grooves are required on the same pipe or if you're working with multiple pipes, repeat the process for each groove.
9. Clean the pipe: Once the grooves are made, clean the pipe to remove any debris or metal shavings generated during the grooving process.
It's important to note that the specific steps and operation of a manual pipe grooving tool may vary depending on the tool design and manufacturer. Always refer to the manufacturer's instructions and follow proper safety precautions when using any tools or equipment.
Troubleshooting
| Fault Phenomena | Fault Analysis | Troubleshooting |
| Voltage buildup fails | 1. Pressure relief valve switch is not tightened. | Tighten pressure relief valve switch |
| 2. Check valve inside the valve body cannot be closed | Dismantle and repair the check valve | |
| Lack in oil | Add hydraulic oil | |
| It doesn’t work when swaying plunger rod of oil pump | 1. Insufficient oil | Add hydraulic oil |
| 2. Too dirty oil blocks the oil suction hole | Wash oil line and replace hydraulic oil | |
| 3. Fitting surface of oil suction valve leaks | Remove the small oil cylinder; use a tool to knock the steel ball of oil suction valve | |
| 4. Oil seal of small piston is damaged | Replace the oil seal. | |
| Principal axis of oil pump leaks oil | Oil seal of principal axis of oil pump is worn or burred | Replace oil seal of principal axis |
| Pipe deviates seriously | 1. Bracket height and direction are improper | Adjust the bracket |
| 2. The lower knurl wheel is worn | Replace it | |
| 3. Pinch roller bearing is damaged | Replace it | |
| Oil suction is not smooth | 1. Oil line is blocked | Remove sundries from oil line |
| 2. Large vacuum degree | Discharge air | |
| 3. Excessive viscosity of hydraulic oil | Replace hydraulic oil |
Our service:
1. How long is your machine warranty?
Warranty of our product is one year(Artificial damage and incorrect use is not included), within warranty period ,we will offer free part and maintain video ,or ever can teach you face-to-face, if machine have serious quality problem ,we support to back .
2. What is your shipping way ?
Express (DHL, FedEx, TNT), by air, Or Sea. We will choose one shipping way to suit customer’s request.
FAQ
Contact Person: Mrs. YeGuiFeng
Tel: +86 85778256
Fax: 86-571-85778267
